Compatibility with Four Thirds System Cameras

A DMC-L1K Body and Other Manufacturers' Lens Compatibility

Manufacturer Model No. Compatibility
OLYMPUS ZUIKO DIGIAL ED 150mm F2.0 OK
ZUIKO DIGIAL ED 300mm F2.8 OK
ZUIKO DIGIAL ED 50mm F2.0 Macro OK
ZUIKO DIGIAL 35mm F3.5 Macro OK
ZUIKO DIGIAL ED 8mm F3.5 Fisheye OK
ZUIKO DIGIAL ED 7-14mm F4.0 OK
ZUIKO DIGIAL 11-22mm F2.8-3.5 OK
ZUIKO DIGIAL 14-45mm F3.5-5.6 OK
ZUIKO DIGIAL 14-54mm F2.8-3.5 OK
ZUIKO DIGIAL ED 18-180mm F3.5-6.3 OK
ZUIKO DIGIAL ED 35-100mm F2.0 OK
ZUIKO DIGIAL 40-150mm F3.5-4.5 OK
ZUIKO DIGIAL ED 50-200mm F2.8-3.5 OK
ZUIKO DIGIAL ED 90-250mm F2.8 OK
SIGMA 18-50mm F2.8 EX DC OK
18-50mm F3.5-5.6 DC OK
18-125mm F3.5-5.6 DC OK
55-200mm F4.0-5.6 DC OK

A DMC-L1K Lens and Other Manufacturers' Camera Body Compatibility

Manufacturer Model No. Compatibility
OLYMPUS E-1 OK
E-500 OK(*1)
E-330 OK
E-300 OK

A DMC-L1K Body and Other Camera Accessories Compatibility / Adaptability

Product Name Manufacturer Model No. Compatibility
Tele Converter OLYMPUS EC-14 OK
Extension Tube OLYMPUS EX-25 OK(*2)
 

Compatibility with Other System Cameras

Product Name Manufacturer Model No. Compatibility
Lens other than Four Thirds system OLYMPUS OM Adaptor(MF-1)+OM Lens OK(*3)
Product Name Manufacturer Model No. Compatibility
Flash OLYMPUS FL-50 OK
FL-40 NO
FL-36 OK
FL-20 NO
Twin Flash OLYMPUS TF-22, STF-22 OK
Ring Flash OLYMPUS RF-11, SRF-11 OK(*4)
Off Flash Cable OLYMPUS FL-CB05 OK
Product Name Manufacturer Model No. Compatibility
Varimagni Angle Finder OLYMPUS VA-1 OK
Magnifier Eye Cap OLYMPUS ME-1 OK
 

(*1)
It will work by firmware version 1.2 or higher. Regarding the version information, please ask the manufacturer.
(*2)
Panasonic does not recommend using the extension tube with DMC-L1K's stock lens. While it is mechanically compatible with the DMC-L1K's body, when used with our stock lens the performance will be unacceptable. We suggest you to contact the manufacturer of the lens you intend to use it with to determine compatibility.
(*3)
Use of this adapter requires that the camera be used in "manual" mode. In addition, within the camera's [CUSTOM] configuration menu, please set [NO RELEASE WITHOUT LENS] to [OFF]. We suggest you contact the manufacturer of the lens you intend to use it with for additional assistance.
(*4)
Due to the mechanical mounting requirements and physical dimensions of the lens, this Ring Flash cannot be used with the DMC-L1K's stock lens. The body of the DMC-L1K is compatible to the flash interface and can be used with other lens. We suggest you contact the manufacturer of the lens you intend to use it with, to determine compatibility.

 發布時間:2006年10月17日

NEWS

網站資料搜尋

  •    

pagetop